"The Barricade™ N 802.11n Wireless Broadband Router (SMCWBR14S-N4) is the perfect all-in-one networking solution for connecting and sharing your high speed cable/xDSL internet connection. Designed for the home, this platform independent multi-functional router combines a 4-port 10/100 LAN switch, High speed Wireless-N access point, NAT firewall with Stateful Packet Inspection (SPI) and User friendly web-based management interface in one convenient device. SMCWBR14S-N4 provides better performance than existing 802.11g technology and is fully backwards compatible with existing 802.11b/g products. It supports the latest WPA and WPA2 wireless encryption standards, which prevent unauthorized access to wireless networks and ensure data is secure. Wireless security can also be set up easily using Wi-Fi Protected SetupTM (WPS) that enables push button (PBC) or PIN configuration. Finally, configuration of your internet connection and advanced router functions is made simple and straightforward with the EZ™ Installation Wizard and intuitive web-based management interface.
PHYSICAL
• One 10/100Mbps WAN port
• 4-port 10/100Mbps LAN switch
• One external fixed 2dBi antenna
• WPS button
• Reset button
LED INDICATORS:
• Power
• LAN (Ethernet Link/Activity)
• WAN (Ethernet Link/Activity)
• WLAN (Wireless Link/ Activity)
• WPS (WPS in progress)
MANAGEMENT FEATURES
• EZ Installation Wizard
• Web based management interface (HTTP)
• Remote management
• SNTP time synchronize
• UPnP
• Firmware upgrade via web-interface
SECURITY FEATURES
• NAT Firewall with SPI
• Intrusion Detection
• Access Control
• MAC, IP and Port filter
• DMZ Host
• SSID Broadcast disable
• Wireless MAC address Filtering
• WEP 64-/128-bit Encryption
• WPA-/WPA2-PSK (Pre-shared Key, TKIP, AES)
• WPA/WPA2 Enterprise mode (802.1x)
• WiFi Protected Setup (WPS, PBC and PIN method)
ROUTER FEATURES
• Shares high speed cable/xDSL internet connection
• 4-port 10/100 LAN switch with auto MDI-MDIX
• Built-in 150Mbps Wireless Access Point
• Static Routing
• Dynamic routing supporting RIP v1/v2
• NAT, NAPT
• Wireless Distribution System (WDS)
• 802.11e WiFi Multimedia (WMM)
• IGMP Proxy
• Dual SSIDs
• Dynamic DNS
• DNS Proxy
• Virtual Server
• DHCP Server
STANDARDS
• Wired
• IEEE 802.3 (10Base-T)
• IEEE 802.3u (100Base-TX)
• Wireless
• Based on IEEE 802.11n technology
• IEEE 802.11g
• IEEE 802.11b
OPERATING FREQUENCY
• FCC: 2412~2462MHz (Ch1~Ch11)
• ETSI: 2412~2472MHz (Ch1~Ch13)
• Japan: 2412~2484MHz (Ch1~Ch14)
• TX Output Power:(Typical)
• 802.11n: 17 +/- 1 dBm
• 802.11g: 17+/- 1 dBm
• 802.11b: 20 +/- 1 dBm
TEMPERATURE
• Operating: 0oC to 40oC (32oF to 104oF)
• Storage:-20oC to 60oC (-4oF to 140oF)
HUMIDITY
• Operating: 10% to 85% Non-Condensing
• Storage: 5% to 90% Non-Condensing
DIMENSIONS
• 90.8 x 135.5 x 28.5mm
• 3.6 x 5.3 x 1in
UPGRADE METHOD
• Web
WEIGHT
• 157g
• 5.5oz
POWER INPUT
• Input: 110 or 240 VAC, 50-60 Hz
• Output: 5V/ 1A
SYSTEM REQUIREMENTS
• Broadband (Cable/xDSL) Internet service and modem with
Ethernet connection.
• 2.4GHz 802.11n wireless adapter or 2.4GHz 802.11b/g Wireless
adapter installed on each PC. Alternatively an Ethernet adapter can be
used.
• Internet Explorer 5.5 or above, Mozilla Firefox 1.0 or above
• We recommend using this product with the SMCWCB-N2,
SMCWPCI-N2 and SMCWUSB-N2 wireless adapters
PACKAGE CONTENTS
• SMCWBR14S-N4
• Power adapter, 5V 1A
• RJ45 cable
• QIG
• EZ Installation & Documentation CD
• Warranty information card" |
